L-3002 lifts your molded foam operations to now
levels of efficiency for applications
requiring additional stabilization. A new silicone designed
especially for MDI and TDI/MDI HR molded foam applications,
L-3002 takes L-3001 one step further to provide you with
greater processing latitude. L-3002 accomplishes this
through excellent foam stabilization while it simultaneously
maintains desirable open celled foam. You also can rely
on this highly efficient silicone to stabilize higher-water
MDI formulations.
With low force to crush and minimal shrinkage,
L-3002 is the preferred silicone for
automotive and upholstered application.
L-3002 will enhance and differentiate
the performance of your molded foam
product
with outstanding features that include:
◎ Superior efficiency for TDI/MDI and high-water MDI formulations
◎ Wide utility in formulations where additional stabilization
is needed compared to L-3001
◎ Excellent foam openness, yielding low force-to-crush
and low shrinkage
Properties
Specification
Phyhsical Form
Clear Liquid
Viscosity(25℃, cSt)
42
Color(GVS)
<2
Specific Gravity(25℃)
0.97
Coefficient of Expansion
0.0008/℃
Flash Point(PMCC, ℃[℉])
127[260]
▶Applications
◎
Suggested use levels in this application
range from 0.8 to 1.0 parts per hundred
polyol(php)
◎
In all MDI foams, L-3002 also is an
effective stabilizer, particularly when
higher
water levels are used to produce low-density
parts
◎
Although use levels in this case will
be between 0.4 and 1.0 php, the product
concentration that yields the best results
will depend on the specific formulation
